Lip Seals
Hydro-Gear Genuine Lip Seals - Reliable Sealing Solutions
Shop genuine Hydro-Gear lip seals for axles, input shafts, pumps, and motors, in both metric and inch sizes. Find your seal by its dimensions (inner diameter x outer diameter x width) or by part number to stop oil leaks with an exact OEM fit.
Genuine Hydro-Gear Lip Seals
This category includes genuine Hydro-Gear lip seals for the shafts on transaxles, pumps, and hydraulic motors.
A leaking shaft seal is one of the most common hydrostatic repairs, and one of the least expensive. Replacing a worn seal with the exact OEM part keeps oil in, keeps dirt and water out, and protects the internal components that depend on clean, full oil. Each seal is listed by part number and, in most cases, by size.
What Is a Lip Seal?
A lip seal, also called a radial shaft seal, is a ring-shaped seal that presses a flexible rubber lip against a rotating shaft to keep oil inside a housing.
Most lip seals have a rigid outer case that fits tightly in the housing bore, a flexible sealing lip that rides on the shaft, and often a small spring that keeps the lip in steady contact. Some also include a second dust lip that blocks dirt and water from the outside. On hydrostatic equipment, lip seals are used wherever a shaft exits a housing, such as at the axles, input shaft, and pump or motor shafts.
How to Read Lip Seal Sizes
Lip seal sizes are written as inner diameter x outer diameter x width. For example, a 17 x 40 x 7 seal fits a 17 mm shaft, a 40 mm housing bore, and is 7 mm wide.
Inner Diameter, Outer Diameter, and Width
The inner diameter (ID) matches the shaft the seal rides on.
The outer diameter (OD) matches the bore in the housing, and the width is the seal's thickness. All three must match for a proper fit.
Metric vs. Inch Seal Sizes
Seals listed with whole numbers, such as 15 x 32 x 7, are usually metric (millimeters).
Seals listed with decimals, such as .25 x .75 x .25, are usually in inches. Don't substitute a close metric size for an inch size, or vice versa.
How to Measure an Old Seal
Use calipers to measure the shaft diameter, the seal's outer diameter, and its width.
If the old seal is damaged, measure the shaft and the housing bore instead for the most accurate result.
Lip Seals by Application
Hydro-Gear lip seals are used wherever a rotating shaft passes through a housing. The most common locations are the axles, input shafts, and pump and motor shafts.
Axle Seals
Axle seals sit where the drive axle exits the transaxle housing.
They're among the most frequent leak points because they're exposed to dirt, water, and grass.
Input Shaft Seals
The input shaft seal is located under the transaxle's drive pulley and cooling fan.
A leak here often shows up as oil spray around the pulley area.
PTO and Pump Shaft Seals
These seals are used on the input shafts of hydraulic pumps and related drive components.
They keep oil in the pump while the shaft spins at engine-driven speed.
Hydraulic Motor Shaft Seals
Motor shaft seals sit behind the wheel hub on hydraulic wheel motors.
A leak here often shows as oil on the inside of the wheel.
Types of Hydro-Gear Lip Seals
Hydro-Gear uses different lip designs and materials depending on where the seal is installed and the conditions it faces.
Single-Lip Seals
Single-lip seals have one sealing lip that retains oil inside the housing.
They're used in protected locations where dirt exposure is limited.
Double-Lip Seals with Dust Protection
Double-lip seals add a second, outer lip that keeps dirt, grass, and water away from the main sealing lip.
They're common on axles and other exposed shafts.
High-Temperature and Specialty Seals
Some seals use special materials or designs for higher temperatures or specific applications.
Signs of a Failing Lip Seal
A failing lip seal usually shows up as oil around a shaft, dirt sticking to an oily housing, or a steadily dropping oil level.
Oil Around the Axle or Shaft
Wet oil at the point where a shaft leaves the housing is the clearest sign of a leaking seal.
Wipe the area clean and check again after use to confirm the source.
Dirt Buildup on an Oily Housing
A slow leak often appears as caked dirt and grass around a seal rather than visible drips.
This film is a sign the seal needs attention.
Dropping Oil Level or Overheating
If the oil level keeps falling or the unit loses power when hot, a leaking seal may be letting oil escape.
Replace it before low oil causes internal damage.
How to Find the Right Lip Seal
The surest way to find the right seal is the part number from your unit's parts manual. If you don't have it, measure the old seal and match the size and design.
Use the Part Number from Your Parts Manual
Find your transaxle, pump, or motor model number, then look up the seal in its parts manual or exploded diagram.
Search for that part number on this page.
Measure the Old Seal and Shaft
Measure the inner diameter, outer diameter, and width with calipers.
Compare your measurements with the sizes listed in the product names.
Check the Seal Type and Lip Design
Note whether the old seal has one lip or two, and whether it has any special markings.
Two seals with the same dimensions can have different lip designs or materials.
How to Replace a Lip Seal
Replacing a lip seal involves removing the old seal carefully, checking the shaft, installing the new seal straight and lubricated, and making sure it faces the right way. Follow the service manual for your unit.
Remove the Old Seal Without Damaging the Bore
Use a seal puller or a small pry tool to work the old seal out of the housing.
Avoid scratching the bore, since any gouge can cause the new seal to leak.
Inspect the Shaft for Wear or Grooves
Clean the shaft and look for grooves, rust, or burrs where the old lip rode.
A worn shaft can cause a new seal to leak; polish minor marks or address damage before installing.
Lubricate and Install the New Seal Correctly
Apply a light coat of clean oil to the seal lip and shaft.
Press the seal in evenly with a seal driver or socket that matches its outer diameter, protecting the lip from sharp edges like keyways or splines.
Check Seal Orientation
Install the seal with the main lip and spring facing the oil side, toward the inside of the housing.
An upside-down seal will leak immediately.
Lip Seal, Seal Kit, or Overhaul Kit?
Buy a single lip seal for one leak, a seal kit for several related seals, and an overhaul kit when the unit is fully disassembled.
If only one axle or input shaft seal is leaking, an individual lip seal from this category is usually all you need. When several seals in the same area need replacement, a seal and retaining ring kit, such as the Hydro-Gear 70853, groups them in one order. For a complete rebuild, an overhaul seal kit includes the seals, gaskets, and O-rings throughout the unit.
Why Choose Genuine Hydro-Gear Lip Seals?
Genuine Hydro-Gear seals are made to the exact dimensions and materials specified for each sealing point on Hydro-Gear equipment.
Exact Dimensions for a Tight Fit
OEM seals match the shaft, bore, and width tolerances of the original part.
A generic seal that's even slightly off can leak or wear quickly.
Materials Built for Hydrostatic Oil and Heat
Hydrostatic units run hot and use specific oils.
Genuine seal compounds are selected to stay flexible and sealed under those conditions.
Consistent Quality Across Every Seal
Every genuine seal is produced to the same specification as the seals installed at the factory.
That consistency helps your repair last.
Related Hydro-Gear Parts and Categories
Explore these related categories for larger seal repairs and complete rebuilds.
Overhaul Seal Kits
Complete sets of seals, gaskets, and O-rings for rebuilding pumps and transaxles in our Overhaul Seal Kits category.
Seal and Retaining Ring Kits
Kits such as the Hydro-Gear 70853 group several seals and retaining rings for compatible units. Browse more in Seal Kits.
Retaining Rings and O-Rings
Replace the retaining rings and O-rings that hold and seal components when you change a lip seal.
Hydro-Gear Transaxles
If a leak has already caused internal damage, find a complete replacement transaxle by model code. You can also browse all Hydro-Gear seals or return to Hydro Pumps Parts to shop more genuine parts.
Lip Seal FAQs
What is a lip seal used for?
A lip seal keeps oil inside a housing where a rotating shaft passes through it, while keeping dirt and water out. On Hydro-Gear equipment, they're used on axles, input shafts, and pump and motor shafts.
How do I measure a lip seal?
Measure the inner diameter (shaft size), outer diameter (bore size), and width with calipers. Seal sizes are listed in that order, such as 17 x 40 x 7.
Which way does a lip seal face?
The main sealing lip and spring should face the oil side, toward the inside of the housing. A dust lip, if present, faces outward.
Can I reuse a lip seal?
No. Once removed, a lip seal is usually distorted or damaged. Always install a new seal.
Why does my new seal keep leaking?
Common causes include a grooved or damaged shaft, a scratched bore, a seal installed crooked or backward, a lip damaged during installation, or the wrong seal size. Check each of these before replacing it again.
Should I replace one seal or all of them?
For a single external leak, replacing that seal is usually enough. If the unit is opened for a rebuild, replace all seals with an overhaul kit.
Are these genuine Hydro-Gear seals?
Yes. All lip seals in this category are genuine Hydro-Gear OEM parts, listed with their original part numbers.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
51161 Seal 17 X 40 X 7 Lip HydroGear Genuine OEM Part
HYDRO GEAR
$5.99$5.39Reliable protection for your lawn equipment's heart. Precision-engineered seal ensuring leak-free operation. Durable material crafted to withstand tough working conditions. Genuine OEM part...$5.99$5.39 -
53901 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$3.13$2.81Precision-engineered for lasting performance and reliability Ensures optimal sealing to protect your hydraulic system Durable design that withstands tough operating conditions 100% genuine OEM part...$3.13$2.81 -
51140 Seal 18 X 32 X 7 Lip HydroGear Genuine OEM Part
HYDRO GEAR
$4.13$3.71Precision and Protection: Keep your machinery running flawlessly with the trusted HYDRO GEAR 51140 Seal. Durable Construction: Crafted for long-lasting performance to withstand rigorous use. OEM...$4.13$3.71 -
55232 Seal Lip HydroGear Genuine OEM Part
HYDRO GEAR
$3.45$3.10HYDRO GEAR 55232 Seal Lip made from durable elastomer material, supplied as a genuine OEM part. This seal lip ensures optimal sealing performance critical to hydraulic system operations. ...$3.45$3.10 -
53008 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$6.95$6.25Precision engineered for lasting performance Essential seal to protect your hydraulic system Durable construction ensures extended equipment life Certified genuine OEM part for guaranteed...$6.95$6.25 -
90080000128 Seal 15 X 35 X 7 Lip Ptc HydroGear Genuine OEM Part
HYDRO GEAR
$3.28$2.95Precision-engineered for lasting reliability Designed to maintain optimal hydraulic system integrity Genuine OEM part ensuring perfect compatibility Trusted quality from the original...$3.28$2.95 -
51081 Seal .25 X .75 X .25 Lip Tungsten Carbide HydroGear Genuine OEM Part
HYDRO GEAR
$2.57$2.31Keep your mower running like new with trusted quality Durable design ensures long-lasting seal integrity Precision engineered for perfect fit and function Genuine OEM part from HYDRO GEAR for...$2.57$2.31 -
50941 Seal .75 X 1 X .15 Lip HydroGear Genuine OEM Part
HYDRO GEAR
$4.10$3.69Precision engineered for maximum reliability and efficiency Durable seal designed to protect your hydraulic system from leaks Genuine OEM part ensuring perfect fit and long-lasting...$4.10$3.69 -
51092 Seal 17 X 47 X 8 Lip Pctn1 HydroGear Genuine OEM Part
HYDRO GEAR
$11.68$10.51Precision engineered for lasting durability and peak performance Seals critical components to prevent leaks and maintain hydraulic efficiency Genuine OEM product ensuring perfect compatibility and...$11.68$10.51 -
55523 Seal Lip HydroGear Genuine OEM Part
HYDRO GEAR
$5.03$4.52Keep your mower running smoothly with precision-engineered parts Durable seal lip designed to protect crucial components from leaks and contamination Exact fit guaranteed for seamless replacement...$5.03$4.52 -
51066 Seal Lip HydroGear Genuine OEM Part
HYDRO GEAR
$4.46$4.01Seal in reliability, power up performance. Precision-engineered lip seal for superior protection against leaks and debris. Durable material ensures long-lasting operation under tough conditions...$4.46$4.01 -
51376 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$6.97$6.27Precision engineered for seamless performance Durable design to extend your equipment's lifespan OEM quality ensures perfect fit and reliability Trusted genuine HYDRO GEAR replacement part 51376...$6.97$6.27 -
51518 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$6.46$5.81Precision and reliability in every seal – engineered to keep your machinery running smoothly. Durable construction that withstands wear and tear for lasting performance. OEM quality assurance...$6.46$5.81 -
51280 Seal 25 X 52 X 7 Lip HydroGear Genuine OEM Part
HYDRO GEAR
$9.63$8.66Precision engineered for peak performance – keep your equipment running flawlessly Durable seal construction ensures long-lasting protection against leaks and wear Easy installation designed to fit...$9.63$8.66 -
50442 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$4.85$4.36Precision engineered for lasting performance Essential seal to protect your hydraulic system Durable material ensures long-term reliability 100% genuine OEM part from HYDRO GEAR 50442 Seal...$4.85$4.36 -
55486 Seal Lip HydroGear Genuine OEM Part
HYDRO GEAR
$9.75$8.77Precision engineered for lasting protection – Keep your equipment sealed tight with confidence. Durable design ensures extended wear resistance for reliable operation under tough conditions...$9.75$8.77 -
50263 Seal .625 X 1.25 X .25 Lip HydroGear Genuine OEM Part
HYDRO GEAR
$3.23$2.90Precision engineered for lasting protection and performance Enhances hydraulic system reliability by preventing leaks Durable construction ensures extended service life Genuine OEM part from HYDRO...$3.23$2.90 -
53456 Seal 8 X 12 X 3 Lip Vc HydroGear Genuine OEM Part
HYDRO GEAR
$2.42$2.17Precision-engineered reliability for your lawn equipment Durable seal designed to prevent leaks and maintain hydraulic integrity Easy installation ensures minimal downtime and extended equipment...$2.42$2.17 -
45075 Seal 26 X 42 X 8 Lip HydroGear Genuine OEM Part
HYDRO GEAR
$3.69$3.32Precision Engineered for Reliability: Keep your machinery running flawlessly with this essential seal. Durable Material Construction: Built to withstand harsh operating conditions and extend...$3.69$3.32 -
53138 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$5.23$4.70Keep your machinery running smoothly with precision-engineered parts Durable seal designed to withstand harsh operating conditions Ensures leak-free performance for enhanced hydraulic...$5.23$4.70 -
50751 Seal 25 X 47 X 7 Lip Tungsten Carbide HydroGear Genuine OEM Part
HYDRO GEAR
$5.72$5.14Keep your equipment running smoothly with precision-engineered quality. Durable seal designed to withstand rigorous use and harsh conditions. Ensures optimal hydraulic system performance and...$5.72$5.14 -
55522 Seal Lip 12 X 24 X 5 Hydrogenated Nitrile Rubber HydroGear Genuine OEM Part
HYDRO GEAR
$4.03$3.62Keep your machinery running smoothly with precision-engineered parts Durable seal lip designed for optimal protection and longevity Maintains hydraulic system integrity by preventing leaks and...$4.03$3.62 -
90080000126 Seal 12 X 25 X 7 Lip Tungsten Carbide HydroGear Genuine OEM Part
HYDRO GEAR
$2.33$2.09Precision engineered for lasting reliability. Essential seal to maintain hydraulic system integrity. Genuine OEM part guaranteeing perfect fit and function. Restore your equipment’s peak performance...$2.33$2.09 -
On Sale
45074 Seal 10 X 25 X 7 Lip HydroGear Genuine OEM Part
HYDRO GEAR
$2.43$2.09$2.18Precision engineered for lasting performance and protection Essential seal to maintain hydraulic system integrity Durable construction to withstand demanding usage Official OEM part from HYDRO GEAR...$2.43$2.09$2.18 -
51017 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$7.08$6.37Precision and Power United: Experience unmatched performance with the HYDRO GEAR 51017. Reliability that Keeps You Moving: Engineered for longevity and consistent operation. OEM Quality Assurance:...$7.08$6.37 -
55949 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$7.26$6.53Precision engineered for lasting protection and performance Essential seal to maintain hydraulic system integrity Durable materials designed to withstand rigorous use Certified genuine OEM part from...$7.26$6.53 -
51476 Seal 15 X 27 X 5 Lip Tungsten Carbide HydroGear Genuine OEM Part
HYDRO GEAR
$3.88$3.49Precision-crafted for lasting durability and leak prevention Essential seal to maintain your equipment's hydraulic efficiency Genuine OEM part ensuring perfect fit and trusted quality 51476 Seal -...$3.88$3.49 -
On Sale
53020 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$2.88$2.30$2.59HYDRO GEAR 53020 Seal is a durable, high-grade rubber sealing component designed for hydraulic systems. It provides a tight seal to prevent fluid leaks, ensuring efficient hydraulic operation. ...$2.88$2.30$2.59 -
50773 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$4.38$3.94Precision-crafted to maintain your Hydro-Gear system's integrity and performance Engineered for exceptional sealing to prevent leaks and enhance equipment longevity Genuine OEM part guaranteeing...$4.38$3.94 -
55378 Seal 17 X 40 X 7 Lip HydroGear Genuine OEM Part
HYDRO GEAR
$12.92$11.62Precision and reliability in every seal Engineered to maintain optimal hydraulic system performance Durable construction for long-lasting protection against leaks Authentic OEM part ensuring exact...$12.92$11.62 -
2000037 Seal 15 X 27 X 7 Lip HydroGear Genuine OEM Part
HYDRO GEAR
$2.93$2.63Precision and reliability in every seal. Engineered for long-lasting performance and leak prevention. Essential for maintaining optimal hydraulic system integrity. 100% Genuine OEM HYDRO GEAR part...$2.93$2.63 -
51918 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$11.74$10.56Authentic HYDRO GEAR OEM replacement part Provides reliable sealing to maintain hydraulic integrity Protects drive systems from contamination and leakage Engineered for exact fit and long-lasting...$11.74$10.56 -
53515 Seal 28 X 52 X 7 Lip Tungsten Carbide HydroGear Genuine OEM Part
HYDRO GEAR
$8.07$7.26Authentic HYDRO GEAR OEM replacement seal for guaranteed compatibility and durability Designed to provide superior sealing and prevent fluid leakage in hydraulic drive systems Manufactured with...$8.07$7.26 -
90080000124 Seal 20 X 30 X 7 Lip Tungsten Carbide HydroGear Genuine OEM Part
HYDRO GEAR
$2.95$2.65Precision engineered for seamless sealing performance Durable material construction ensuring extended equipment life Authentic OEM part from Hydro-Gear guaranteeing exact fit and...$2.95$2.65 -
55175 Seal 1.00 X 2.44 X .375 Lip HydroGear Genuine OEM Part
HYDRO GEAR
$9.29$8.36Precision-engineered to maintain seamless operation Exceptional resistance to wear and hydraulic fluid Ensures long-lasting equipment integrity Manufactured as an original Hydro-Gear OEM component...$9.29$8.36 -
44782 Seal .984 X 1.5 X .25 Lip HydroGear Genuine OEM Part
HYDRO GEAR
$3.43$3.08The 44782 seal is a precisely engineered lip seal crafted from durable materials ensuring an exact OEM fit. It provides critical sealing to prevent fluid leakage and maintain hydraulic system...$3.43$3.08 -
53357 Seal 15 X 28 X 7 Lip Vtc HydroGear Genuine OEM Part
HYDRO GEAR
$8.46$7.61Experience precision-crafted quality designed to endure extreme conditions Engineered to maintain optimum hydraulic integrity and prevent leakages Guaranteed genuine OEM part, ensuring seamless...$8.46$7.61 -
44378 Seal HydroGear Genuine OEM Part
HYDRO GEAR
$4.17$3.75Depend on excellence engineered for enduring drive system integrity Precision-crafted hydrostatic sealing for leak-free operation Durability that safeguards high-performance Hydro-Gear...$4.17$3.75