ZT-2800 Hydrostatic Transaxles

Genuine Hydro-Gear ZT-2800 Hydrostatic Transaxles

Find the exact genuine Hydro-Gear ZT-2800 transaxle for your zero-turn mower. Enter the model code from your transaxle's label (for example, ZH-XXXX-XXXX) in the product filter below to go straight to the matching left or right unit.


Genuine Hydro-Gear ZT-2800 Replacement Transaxles

This category offers complete, genuine Hydro-Gear ZT-2800 transaxles in a wide range of factory model configurations.

The ZT-2800 is built in many versions for different mower manufacturers, and each version has its own model code, such as ZH-JCBB-SEMB-2PXX or ZK-GHEF-SKKB-2PLX. Because each unit here is listed by that code, you can order the exact configuration that came on your mower, without guessing or adapting a different unit.

What Is the Hydro-Gear ZT-2800?

The Hydro-Gear ZT-2800 is an integrated zero-turn transaxle used on residential riding mowers. It packs a variable-displacement pump, hydraulic motor, and reduction gearing into one sealed housing that drives a single rear wheel.

How the ZT-2800 Drives a Zero-Turn Mower

Every zero-turn mower with ZT-2800 drive uses a pair of units, one for each rear wheel.

Each control lever adjusts its own transaxle, so the wheels can turn at different speeds or in opposite directions. That's what allows the mower to turn in place.

Typical ZT-2800 Applications

The ZT-2800 is designed for lighter residential zero-turn mowers used on home lawns.

Check your mower's specifications or the transaxle label to confirm it uses a ZT-2800.

How to Find Your Exact ZT-2800 Model Number

The model code on your transaxle's label is the only reliable way to choose the right ZT-2800. Many versions look identical from the outside but differ in internal parts, controls, and mounting.

Where to Find the Transaxle Label

The identification label is on the transaxle housing, usually visible from the rear or underside of the mower.

Park on level ground, turn off the engine, and clean the housing if dirt or grease covers the label.

How to Read a Hydro-Gear ZT-2800 Model Code

The model code typically begins with letters such as "ZH" followed by a series of letters and numbers, for example ZH-XXXX-XXXX.

Every character matters, because two codes that differ by a single letter can be different configurations. Copy the full code exactly and enter it in the product filter above.

What to Do If the Label Is Missing or Unreadable

Use your mower's model and serial number to look up the transaxle part number in its parts manual.

If you still can't identify the unit, contact our support team with photos of the transaxle and your mower information.

Left vs. Right ZT-2800 Transaxles

ZT-2800 transaxles come in left-hand and right-hand versions that are not interchangeable. Always order the side that matches the unit you are replacing.

Why Left and Right Units Have Different Model Numbers

The left and right transaxles are mirror images, with control arms, ports, and mounting features positioned for their side of the mower.

Because of these differences, each side has its own model code, even on the same mower.

Should You Replace Both Transaxles at Once?

If only one unit has failed, replacing that side is usually enough.

On high-hour mowers where both units show wear, some owners replace both at the same time to keep drive response even on both wheels.

Which Mowers Use the Hydro-Gear ZT-2800?

The ZT-2800 is used on residential zero-turn mowers from several manufacturers.

Mower brands can use different transaxles across models and years, so the brand name alone doesn't confirm compatibility. The model code on the transaxle label is what identifies the correct replacement.

ZT-2800 vs. ZT-3100: Which Transaxle Do You Have?

The ZT-2800 and ZT-3100 are both Hydro-Gear zero-turn transaxles, but the ZT-2800 is the lighter-duty model and the ZT-3100 is built for heavier residential and light-duty use. They are not interchangeable.

The two can look similar at a glance, so check the label: the model designation and code tell you which family your unit belongs to. If your label points to a ZT-3100, browse our ZT-3100 category instead.

Common ZT-2800 Problems and Symptoms

Most ZT-2800 issues show up as loss of drive, uneven speed between wheels, power loss when hot, leaks, or rough operation. Before replacing a unit, rule out simpler causes such as the drive belt, bypass position, linkages, and tire pressure.

Mower Won't Move or Moves Very Slowly

Confirm both bypass controls are in the drive position and the drive belt is turning the transaxle pulleys.

If they are, the transaxle may need purging or may have internal wear.

One Side Is Weaker Than the Other

If the mower drifts to one side at full speed, one transaxle may be producing less power.

Check tire pressure and lever adjustment first, then inspect the weaker unit.

Loss of Power When the Transaxle Gets Hot

A unit that works when cold but slows down as it heats up often has internal wear or degraded oil.

Debris packed on the housing or a damaged cooling fan can make the problem worse.

Leaking Oil from the Axle or Input Shaft

Oil around the axle or input shaft points to a seal leak.

Leaks reduce oil volume and can lead to overheating and further damage.

Jerky or Noisy Drive Operation

Jerky movement, whining, or knocking can be caused by air in the system or worn internal parts.

Purging may help; persistent noise usually means the unit needs service or replacement.

Repair or Replace Your ZT-2800 Transaxle?

Repair makes sense for external problems; replacement makes sense for internal wear or housing damage.

Issues such as a leaking seal, a broken cooling fan, a stretched belt, or air in the system can often be fixed with parts or a purge. When the unit has lost significant power, makes persistent internal noise, or has a cracked housing, a complete replacement is usually faster and more dependable than an internal rebuild.

A new, genuine ZT-2800 also returns the drive to factory specifications, which is hard to guarantee with a used or rebuilt unit.

Installing a Replacement ZT-2800 Transaxle

Installing a ZT-2800 involves removing the old unit, transferring or replacing related parts, mounting the new unit, and purging it before use. Follow your mower's service manual, and have a qualified technician do the work if you're not experienced with drive systems.

What Comes with a Complete Transaxle

A complete transaxle typically includes the housing with its internal pump, motor, and gearing, filled and ready for installation.

Check the product listing to see whether items such as the pulley, fan, or control arm are included for your model.

Parts to Transfer or Replace During Installation

You may need to move the input pulley, cooling fan, wheel hub, or control linkage from the old unit.

Inspect the drive belt, idlers, and mounting hardware, and replace anything that is worn.

Purging the ZT-2800 After Installation

A new or reinstalled unit must be purged of air before normal use.

Raise the drive wheels off the ground and follow the purge steps in your service manual, moving the levers slowly through forward and reverse.

How to Extend the Life of Your ZT-2800

The ZT-2800 lasts longest when it stays cool, isn't overloaded, and is used as designed.

Keep the Cooling Fins and Fan Clean

Grass and dust packed on the housing trap heat inside the transaxle.

Blow or brush off debris after mowing, and replace a cracked or damaged cooling fan.

Avoid Overloading on Steep Slopes

The ZT-2800 is built for residential use, and steep hills or heavy towing loads increase heat and internal wear.

Stay within the slope and load limits in your mower's operator's manual.

Use the Bypass Correctly When Pushing the Mower

Always engage the bypass on both transaxles before pushing the mower, and push it slowly for short distances only.

Return both bypass controls to the drive position before starting the engine. Worn or damaged controls can be replaced with genuine Hydro-Gear bypass arms.

Why Buy Genuine Hydro-Gear ZT-2800 Transaxles?

A genuine Hydro-Gear ZT-2800 matches your original unit's model code exactly, so it bolts in, connects, and drives the way your mower was engineered to.

Factory-Matched Model Configurations

Each unit is built to the specific configuration identified by its model code.

That ensures the internal setup, controls, and output match what your mower manufacturer specified.

Drop-In Fit for Your Original Mounting

Genuine units match the original mounting points, axle, input shaft, and control arm position.

No adapters or modifications are needed.

Original Performance and Reliability

A new OEM transaxle restores the speed, tracking, and responsiveness of your mower's drive.

It's the most direct way to return your mower to like-new drive performance.

Related Hydro-Gear Parts

These related Hydro-Gear parts can help with diagnosis, repair, or a complete drive system service.

Hydro-Gear ZT-3100 Transaxles

If your transaxle label shows a ZT-3100, browse our ZT-3100 category for the matching unit.

Hydro-Gear Seals and Gaskets

Seals and gaskets fix leaks at the axle, input shaft, or housing without replacing the whole unit.

Hydro-Gear Filters

Genuine Hydro-Gear filters keep oil clean in transaxles that use an external filter.

Match the filter to your transaxle model.

Drive Belts and Pulleys

A worn drive belt or damaged pulley can cause weak drive that looks like a transaxle problem.

Inspect them whenever you service or replace a transaxle. You can also browse all Hydro-Gear transaxle categories or return to Hydro Pumps Parts to shop more genuine parts.

Hydro-Gear ZT-2800 FAQs

How do I know which ZT-2800 model I need?

Read the full model code on your transaxle's identification label, then enter it in the product filter on this page. If the label is missing, use your mower's parts manual to find the transaxle part number.

Are all ZT-2800 transaxles the same?

No. The ZT-2800 is built in many configurations for different mowers, and each has its own model code. Units that look alike can differ internally, so match the code exactly.

Can I replace a ZT-2800 with a ZT-3100?

No. The ZT-2800 and ZT-3100 are different transaxle families with different mounting, controls, and ratings. Replace your unit with the same model specified for your mower.

Are left and right ZT-2800 transaxles interchangeable?

No. Left and right units are mirror versions with different model codes. Order the side that matches the unit you are replacing.

Can a ZT-2800 transaxle be rebuilt?

External issues such as leaking seals or air in the system can often be repaired. For internal wear or housing damage, a complete genuine replacement is usually the more reliable option.

How do I purge a Hydro-Gear ZT-2800?

With the drive wheels raised off the ground, run the engine and slowly move each control lever through forward and reverse several times, following your service manual. Purging removes air that causes weak or jerky drive.

What mowers come with the Hydro-Gear ZT-2800?

The ZT-2800 is used on residential zero-turn mowers from several brands. Check the label on your transaxle to confirm your mower uses a ZT-2800.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • HYDRO GEAR Transaxle Hydrostatic - Genuine part. ZK-GPEB-SCLB-2GLX - Image 1

    ZKGPEBSCLB2GLX Transaxle Hydrostatic Zt2800 HydroGear Genuine OEM Part

    HYDRO GEAR

    $1,309.27
    $1,178.34
    The HYDRO GEAR ZK-GPEB-SCLB-2GLX transaxle hydrostatic is a high-grade metal replacement part, manufactured to OEM specifications for authenticity and durability. This transaxle delivers precise...
    $1,309.27
    $1,178.34
    Qty in Cart: 0
    Quantity:
    Price:
    $1,309.27
    $1,178.34
    Subtotal:
  • ZHMCBBSEMC3PXX Transaxle Hydrostatic HydroGear Genuine OEM Part

    ZHMCBBSEMC3PXX Transaxle Hydrostatic HydroGear Genuine OEM Part

    HYDRO GEAR

    $1,145.59
    $1,031.03
    Power your ride with precision and reliability. Engineered for smooth hydrostatic transmission performance. Durable design ensures long-lasting operation under tough conditions. Certified genuine...
    $1,145.59
    $1,031.03
    Qty in Cart: 0
    Quantity:
    Price:
    $1,145.59
    $1,031.03
    Subtotal:
  • Total: items /

Adding your products to cart